RCM Programming Tool
RCM Programming Tool
Last updated: 09/27/2024 – Current Version: 226
Updating your Device
Previous
Next
If you have an adapter, most things work out of the box and no longer require any reprogramming!
- Connect your device to your computer and launch the programming tool. Then click Reset to factory.
- Then, with the proper Device Type and Device Variant selected, click Erase and Configure. If you are not sure which Variant to use, stick with the Default.
- Wait until the status bar at the bottom of the window reaches 100%. After that you can close the programming tool and use your device!
The RCM Programming Tool is a configuration tool for devices sold by RetroCultMods. It is a simplified version of Sanjay900’s Santroller platform, which is the backbone of hardware modding in the plastic instrument community. If you have the means, please sponsor Sanjay monthly or with a one time donation via Github Sponsors!
Still have questions?
If you have a question about something that isn’t covered here, check out our additional resources.
And if that doesn’t do the trick, you can send an email to support@RetroCultMods.com or through the button below.
Contact Details
Quick Links
© 2024 RetroCultMods. All Rights Reserved.